NOTE:
1. This tweak was initiated for the main purpose of educating our readers, we will Not be held responsible if this info is used for any illegal activity.
2. We reserve the right that if you get your device bricked during the process stated below, We won't be held responsible for any Damages.
Meanwhile this post should be useful if your MTK phone is having problem registering your SIM to your network. Probably due to change of location.
That's by the way, but we assure damaging your device during procedure is nothing to worry about, you'll get it successfully done within seconds if you follow the Steps below carefully:
REQUIREMENTS For changing/Fixing the IMEI of your MTK android :
1. A Rooted Android *although Not compulsory coz it works without rooting most MTK devices* (MTK 6577 / 6575)2. A valid IMEI number
3. The MobileUncle MTK Tools from PlayStore
N.B
Note that when you use IMEI number of your old unused mobile phone, be sure to never insert a SIM of same network again.
i.e >> If you use a Glo sim on a Blackberry (or any other phone), after you copied and use the Blackerry's IMEI into your Android, your Glo will work fine on your Android. But be sure not to insert that same Glo SIM into the Blackberry again, If you do and switch it on, the sim will not register to the network.
After getting the above ready, follow the Procedures below:
1. Dial *#06#, write down your Default IMEI, or Simply Back it up on ur SDcard >> See this Post on How to Backup IMEI on Android.
2. Run the MobileUncle tools App
3. Go to >> Engineer Mode >> Engineer Mode (MTK)
4. Scroll down to CDS Information
5. CLICK >> Radio Information
You'll see something like:
Phone1 -
Phone2 -
In that select Phone2, because in most of these Chinese cloned phone, the 1st Sim which is a 3G will work perfectly. Problem only happens when we insert the second sim. Such cases are experienced if after you check, you can see the IMEI of 1st sim starting with 35xxxxx and the 2nd will start with 88xxxxxxxx. That is why the second sim is not able to register to the network, because its not in international formatted IMEI. So usually we need to change the IMEI of Phone 2.
1. Dial *#06#, write down your Default IMEI, or Simply Back it up on ur SDcard >> See this Post on How to Backup IMEI on Android.
2. Run the MobileUncle tools App
3. Go to >> Engineer Mode >> Engineer Mode (MTK)
4. Scroll down to CDS Information
Phone1 -
Phone2 -
In that select Phone2, because in most of these Chinese cloned phone, the 1st Sim which is a 3G will work perfectly. Problem only happens when we insert the second sim. Such cases are experienced if after you check, you can see the IMEI of 1st sim starting with 35xxxxx and the 2nd will start with 88xxxxxxxx. That is why the second sim is not able to register to the network, because its not in international formatted IMEI. So usually we need to change the IMEI of Phone 2.
When you select any of Phone1 or Phone2 - you'll find AT+ __________
Inside there input your new IMEI number,
click >> SEND AT COMMAND
That's all!
0 comments:
Post a Comment