How to remove Pattern Lock on any Mediatek Device

Remove Pattern Lock on Mediatek Device

Step 1: Download and install Mediatek Driver on your Computer (if in case Mediatek Drivers, is already installed on your computer then SKIP this step).

Step 2: Download and extract SP Flash Tool on your Computer. After extracting you will be able to see the following files:

Step 3: Download and extract the Stock Firmware of your Mediatek Smartphone or Tablet.

Step 4: Now, Power Off the Device.

Step 5: Now, Open SP Flash Tool

Step 6: Click on the Scatter Loading button and select the Scatter file from the firmware folder (you will find the scatter file in all Mediatek Stock Firmware).

Step 7: Once, Scatter file is loaded in SP Flash Tool, you will be able to see the following screen:

Step 8: Now, Select Download Method as Download Only.

Step 9: Now, remove tick from all the available names, except userdata.

Step 10: Now, Click on the Download button.

Step 11: Now, Connect your Device to the Computer using the USB Cable (make sure device is OFF).

Step 12: Now, Press Volume Down or Volume UP key, so that SP Flash Tool can recognize your device and begin the Flashing Process.

Step 13: Once Flashing Process is completed you will be able to see the Green Ring at the end.

Step 14: Now, Close SP Flash Tool on your computer and disconnect your Device from the computer.

Step 15: Now, restart your Device. Once your device is restarted you wont be able to see Pattern Lock on the screen.